Sale!

Parex Super FG

Product code: 629618

£125.94 INC VAT

£104.95 EX VAT

Click and Collect Available Show stores

If all of your items are available for click & collect, you'll be able to select a location for pickup at checkout.

Stock availability for Parex Super FG

Leeds

Unit 14 Gelderd Trading Estate, West Vale, Leeds, , LS12 6BD, .

In stock

Glasgow

Unit 30 Deerdykes View, Westfield, Cumbernauld, Glasgow, G68 9HN, .

Out of stock

Essex

The Garage Unit. The Forge, Ockendon Road, North Ockendon, , RM14 3PS, .

Out of stock

Caldicot

Unit 16A Norman Way, Severn Bridge Industrial Estate, Caldicot, Monmouthshire, NP26 5PT, .

Out of stock

Need some help? Call us on 01708 855 698

Product description

Parex Super FG

Parex Super FG is a pre-mixed magnesium phosphate cement blended with specially selected aggregates. The resulting mix produces a mortar which gives rapid setting and high early strength properties suitable for works carried out in raising or lowering carriageway frames and covers. Repairs can be carried out on concrete surfaces and with the speed of hardening; these may be brought into early use. The chemical mechanism will continue at temperatures down to 0°C thus enabling repairs to be carried out on floor areas in cold stores. Using suitable protection cold store area repairs may be carried out at temperatures down to –20°C. The mixed mortar, when placed, will harden in approximately 10 minutes. The compressive strength gain will reach between 15N/mm2 and 23N/mm2 within 3/4 hour depending on the mix design used. Parex Super FG is a self contained product only needing to be mixed with water on site to produce a firm mortar. The addition of further water will produce a grout. Addition of aggregate to the grout will produce a workable concrete. The product is chloride free and can be safely used with cast iron and steel units. The mortar can be placed in sections of 8mm to 50mm in thickness and greater thicknesses can be built up in layers. After placement no special curing is required in moderate ambient conditions. A coarser grade, Parex Super FG is available.

Uses include:

Re-bedding of raised manhole frames.
Bedding of frames in new roads.
Support of road furniture.
Rapid repairs to concrete surfaces.
Repairs to cold room areas.

Specification Outline

Bedding and levelling shall be carried out using Super FG as manufactured by Parex Ltd. The product must be stored, handled and placed strictly in accordance with the manufacturer’s instructions.

Quality Assurance Parex Limited has an integrated business management system. This is externally accredited by UK CARES to BS EN ISO 9001:2015, BS EN ISO 14001:2015, BS ISO 45001:2018 and BES 6001. Standards: Epoxy Putty has been tested in accordance with the relevant parts of the following standard: BS 6319

Instructions for use

Preparation Laitance and all loose material including dust, oil and grease should be removed in order to produce a sound substrate. The work area should be pre-wetted taking care to remove any standing water.

Mix Designs The water requirement for each 25kg bag of Super FG to attain the designed consistency is:- Mortar consistency 1.50 to 1.75 litres Grout consistency 2.00 to 2.25 litres Concrete mix 1.75 to 2.00 litres To use as concrete add 10kg of 10mm pea shingle (avoid limestone) to each 25kg bag of Super FG. Mixing Excess mixing water should not be used. When mechanical mixing is used wet down the mixing vessel then drain all free water. Add the measured quantity of mixing water. Add the full bag of Parex Super FG. Mix for at least one minute. Suitable mixers include a slow speed high torque drill and Mortar Stirrer. For mixing at temperatures below 5°C, pre-warm the mixing vessel with warm water and use warm mixing water. Suitable water temperatures are approximately 25-30°C. Placing And Setting Frames Place the mixed mortar as soon as mixing is complete. The chemical setting of Parex Super FG is rapid and all mixed material should be placed within 10 minutes of adding the mixing water. Set frames by “the drop bed method” or by shimming with hard ceramic tiles to line and level followed by “mortar packing”. The mortar should be fully compacted to obtain maximum strength. In both methods the mortar may be face finished using normal steel trowelling. Once the frame has been set, the outer area can be filled to the required thickness using Parex Super FG as either a grout or concrete mix. Curing No special curing is required at temperatures between 5°C and 35°C. For placing temperatures outside this range contact the Technical Service Department. The reinstatement of the road surfaces may be undertaken within one hour of placing. The road may be opened to vehicular traffic within two hours of placing.

For more information on Parex Super FG click here To view our extensive range of Parex products click here

Size

25kg

Solseal Delivery Schedule

Orders placed before midday will be dispatched for delivery the same day (except weekends and bank holidays) subject to stock availability.

Orders placed after midday will be dispatched the next working day (except weekends and bank holidays) subject to stock availability.

When you have placed your order our dispatch team will prepare your items for collection from our couriers. When the couriers have collected your items you will be emailed a tracking number.

Please note: Our offices and warehouses are open Monday to Friday, 8am to 5pm. We are closed on weekends and bank holidays. ‘Working day’ is Monday to Friday.

Please allow 3-5 working days for your delivery unless ‘Next Day Express Delivery’ is stated.

If you have ordered a product that is listed as ‘Next Day Express Delivery’ before midday on Monday to Friday your order will be processed an dispatched the same day delivered the next working day.

For example. If you order a product listed as ‘Next Day Express Delivery’ on Monday before midday it will be delivered the next day (Tuesday).

If you order a product listed as ‘Next Day Express Delivery’ on Friday before midday it will be delivered the next working day (Monday).

If you order a product listed as ‘Next Day Express Delivery’ on Friday after midday it will be processed the next working day (Monday) and delivered the following working day (Tuesday).

Orders for UK Mainland

Any orders placed Monday to Friday before midday will be processed and dispatched the same day.

Any orders placed Monday to Friday after midday will be processed and dispatched on the next working day.

Saturday delivery is available on request only – please call 01708 855 698 for a quote.v

Technical pdf Safety pdf

Products

Sika Sealant

Sika Adhesives

Building Products

Sika Waterproofing Products

Roofing

Flooring